Site-Specific Safety Plan Insulation — Dust, Skin & Fall according to Canada Labour Code Part II Skip to content

Method Statement for Insulation — create with RAMSagent

A Site-Specific Safety Plan for insulation describes how mineral wool, foam plastic, or spray insulation is applied safely. It includes dust protection, skin protection, fall protection for roofs/attics, and ventilation for solvent-based insulation products.

RAMSagent selects the right protection level based on insulation material and application method.

Typical risks for Method Statement — Insulation

Risks, description, and applicable legislation
Risk Description Legal Severity
Inhalation of Mineral Wool Dust Glass wool and rock wool cause mechanical irritation in the respiratory tract. FFP2 respirators and full-cover overalls are required for extended work or enclosed environments. Canada Labour Code Part II, COHSR Medium
Skin Irritation Mineral wool fibres cause itching and rashes. Long sleeves, gloves, and protective creams. Change work clothes before going home. Canada Labour Code Part II, COHSR Medium
Fall Risk during Attic Insulation Loose insulation hides beams in uninsulated attics — a walking board or temporary protective roof over insulation is required to prevent falls through the roof. Canada Labour Code Part II, COHSR Critical
Isocyanates during Spray Insulation PU foam releases isocyanates during application — permits and medical surveillance required. Ventilated respirators and evacuation for 24 hours. Canada Labour Code Part II, COHSR Critical
Canada Labour Code Part II, COHSR Chemical Workplace Hazards
Chapter 3 (dust exposure) and Chapter 16 (permit-required substances like isocyanates).
Canada Labour Code Part II, COHSR Working at Heights
Requirements for collective fall protection during roof work and attics over 2 m.
Canada Labour Code Part II Medical Surveillance
Permits and medical surveillance for work with isocyanates (PU foam).

Frequently Asked Questions

Is a permit required for PU spray insulation?
Yes — PU-based spray insulation releases isocyanates and requires a permit from the relevant authority and medical surveillance according to COHSR.
Is FFP2 sufficient for mineral wool?
FFP2 is adequate for short-term work in well-ventilated areas. In confined spaces, attics, or with larger quantities, FFP3 is recommended — RAMSagent flags this automatically.

Free Word Template: Method Statement

Enter your email address and consent to processing according to the policy below. You'll then receive a link to download the template.