Method statement for Interior joinery — create with RAMSagent
A method statement for interior joinery and fit-out explains how a specific task will be carried out safely on site — hazards, sequence, plant, PPE and supervision. It supports CDM 2015 coordination and aligns with the Management of Health and Safety at Work Regulations 1999.
RAMSagent drafts consistent method statement content for interior joinery and fit-out, keeps hazards and controls traceable, and speeds review before you distribute to site teams.
Typical risks for Method statement — Interior joinery
| Risk | Description | Legal basis | Severity |
|---|---|---|---|
| Falls from height | Edges, openings and incomplete guardrails during structural work — prefer collective protection (edge protection, nets) before personal fall arrest. | Work at Height Regulations 2005 | Critical |
| Lifting and mechanical handling | Crane lifts, MEWPs and taglines — lift plans, exclusion zones and competent signallers under LOLER and PUWER. | LOLER 1998; PUWER 1998 | High |
| Dust (respirable crystalline silica) | Cutting, chasing and demolition of concrete or brick — water suppression, on-tool extraction, RPE where exposure cannot be controlled adequately. | COSHH Regulations 2002 | High |
| Site transport and plant | Pedestrian/plant interface, reversing vehicles and exclusion zones around excavators. | CDM 2015; Construction (Head Protection) Regulations 1989 | Medium |
Applicable regulations
- HSW Act 1974 Health and Safety at Work etc. Act 1974
- Primary duties for employers and contractors to ensure health, safety and welfare.
- CDM 2015 Construction (Design and Management) Regulations 2015
- Client, principal designer and principal contractor duties; construction phase plan.
- MHSWR 1999 Management of Health and Safety at Work Regulations 1999
- Risk assessment, competent advice, arrangements and monitoring.
Frequently asked questions
- Is a method statement the same as a risk assessment for interior joinery and fit-out?
- No. A risk assessment identifies hazards and overall control measures; a method statement describes how a specific task will be carried out safely on site. RAMSagent links them so teams stay aligned.
- Does RAMSagent replace competent advice?
- No. RAMSagent accelerates drafting and consistency with common UK construction duties (CDM/HSE). A competent person must still review site-specific controls.
Related guides
Free Word template: method statement
Enter your email address and approve processing according to the policy below. You will then receive a link to download the template.