Procedimiento seguro para Estructura — crea con RAMSagent
Una planificación del trabajo para construcción de estructuras describe cómo se monta de forma segura una construcción portante — elementos prefabricados, columnas, forjados y cerchas. El documento debe detallar el plan de elevación, cuerdas de guía, apuntalamiento temporal y protección contra caídas antes de que los elementos sean cargados, de acuerdo con la LPRL y los RDs aplicables sobre trabajos en altura y riesgos específicos.
RAMSagent integra los planes de elevación con la evaluación de riesgos para el montaje de estructuras y sugiere protección colectiva contra caídas por fase.
Riesgos habituales para Procedimiento seguro — Estructura
| Riesgo | Descripción | Referencia legal | Gravedad |
|---|---|---|---|
| Falls from Height During Assembly | Floor edges, lift shafts, and roof edges are critical fall edges during structural assembly. Collective protection (guardrails, nets, personnel lifts) should be prioritized over personal fall protection equipment. | AFS 2023:11, 15 kap | Crítico |
| Heavy Lifting of Prefabricated Elements | Lifts over 10 tons require a lifting plan, certified crane operator, and signal person. Wind speeds exceeding 10 m/s suspend lifting unless manufacturer's data allows otherwise. | AFS 2006:6 | Alto |
| Crush Risk During Fitting | No hands or body parts should be between elements and floor slabs during lowering. Tag lines control the element from a distance. | AFS 2023:13, 8 kap | Alto |
| Temporary Bracing | Columns and wall elements must be braced until permanent connections are made. The sizing of braces should be shown in the method statement. | AFS 2023:11, 15 kap | Alto |
Normativa aplicable
- AFS 2023:11 Work at Height
- Chapter 15 regulates construction work and requires collective protection for work above 2 meters.
- AFS 2023:13 Design and Execution of Construction Work
- Covers prior notification and specific risks during structural assembly.
- AFS 2006:6 Use of Lifting Equipment and Devices
- Requirements for lifting plans, inspections, signaling, and crane operator certification.
Preguntas frecuentes
- What is the difference between structural construction and foundation work?
- Foundation work includes piling, slabs, and basement walls. Structural construction refers to the load-bearing structure above ground — columns, floor slabs, roof trusses. RAMSagent has separate method statements for both.
- When is a lifting plan required?
- For critical lifts (>10 tons, personnel lifts, lifts over people or traffic), HSE guidance requires a written lifting plan to be included in the method statement.
Guías relacionadas
Plantilla Word gratuita: procedimiento de trabajo
Introduce tu correo electrónico y acepta el tratamiento según la política inferior. Recibirás un enlace para descargar la plantilla.