Aller au contenu

Mode opératoire pour Façade — créer avec RAMSagent

Une préparation de chantier pour façade décrit comment l'assemblage, le crépissage, la peinture ou la rénovation de façade est effectué en toute sécurité depuis un échafaudage ou un élévateur. Elle comprend le choix de la classe d'échafaudage, le plan de protection contre les chutes, les limites de vent et les mesures à prendre en cas d'impact de la circulation générale.

RAMSagent relie le plan d'échafaudage, le plan de protection contre les chutes et les règles d'action en cas de conditions météorologiques dans la même préparation de chantier.

Risques typiques pour Mode opératoire — Façade

Risques, description et référence légale applicable
Risque Description Référence légale Gravité
Fall from Scaffolding Façade scaffolding over 2 m requires a top rail, mid rail, and toe board at all working levels. Access is only permitted via a stair tower; climbing on scaffolding components is prohibited. AFS 2023:11, 15 kap; AFS 2013:4 Critique
Wind Impact At wind speeds exceeding 10 m/s, metal assembly and façade panels must be halted. Scaffolding must be designed for load + wind load according to the manufacturer's instructions. AFS 2013:4 Élevé
Falling Materials to Pedestrians When working on façades above public traffic, protective canopies or solid barriers are required according to the Building Act. A signal person must be present if the public is nearby. AFS 2023:13, 10 kap Élevé
Ergonomic Strains Repetitive work above shoulder height can cause strain injuries. The height of the platform should be adjusted so that work is performed between waist and shoulder level. AFS 2012:2 Moyen
AFS 2013:4 Scaffolding
Regulations for scaffolding class, contractor training, inspection, and documentation.
AFS 2023:11 Work at Height
Chapter 15 requires collective protection for fall heights over 2 m on construction sites.
AFS 2023:13 Construction and Civil Engineering Work
Requirements for protective canopies and barriers when working over the public.

Questions fréquentes

Who is allowed to assemble scaffolding?
According to HSE guidance, training in 'General Scaffolding' is required for scaffolding up to 9 m and 'Special Scaffolding' for over 9 m or with deviations in execution.
What scaffolding class is sufficient for plastering work?
Plastering work with materials typically requires class 4 (250 kg/m²). Always check the scaffolding drawing and the manufacturer's instructions — RAMSagent highlights the choice in the method statement.

Modèle Word gratuit : mode opératoire

Indiquez votre adresse e-mail et acceptez le traitement conformément à la politique ci-dessous. Vous recevrez ensuite un lien pour télécharger le modèle.