Vai al contenuto

Valutazione dei rischi per Intonacatura — crea con RAMSagent

Una valutazione dei rischi per l'intonacatura valuta i rischi di progetto durante la rimozione dell'intonaco esistente, la miscelazione di malta e l'intonacatura su facciata. Comprende polvere di silice, ustioni chimiche, vibrazioni e cadute secondo il D.Lgs. 81/2008.

RAMSagent calcola la dose cumulativa di polvere e vibrazioni per l'intero progetto.

Rischi tipici per Valutazione dei rischi — Intonacatura

Rischi, descrizione e riferimenti normativi
Rischio Descrizione Riferimento normativo Gravità
Silica Dust Removal and sanding of plaster generates respirable silica dust. Project level: wet methods as standard, FFP3 masks as backup. AFS 2023:10, 3 kap Alto
Alkaline Burns Lime and cement mortars have a pH >12. Skin contact for hours can cause burns. Gloves, coveralls, and eye protection are required. AFS 2023:10, 8 kap Alto
Vibration from Chiseling Pneumatic chisels during demolition cause hand-arm vibration. Daily A(8) accumulates over the project. AFS 2005:15 Alto
Falls from Scaffolding Plastering work is conducted from scaffolding class 3–4. Fall risk exists during edge work and when handling materials upwards on the scaffolding. AFS 2013:4; AFS 2023:11 Alto
AFS 2023:1 Systematic Health and Safety Management
Systematic approach to health and safety management.
AFS 2023:10 Chemical Workplace Risks
Chapters 3 and 8 cover dust and skin risks.
AFS 2013:4 Scaffolding
Scaffolding class for plastering — typically 3–4.

Domande frequenti

Can lime replace cement?
Sometimes — pure lime mortars are less alkaline but take longer to cure. The risk assessment weighs health against the schedule.
What is the protection level for chiseling?
Low-vibration chisels under 2.5 m/s², gloves with anti-vibration padding, and a maximum of 2 hours per day — included in the action proposal.

Modello Word gratuito: valutazione dei rischi

Inserisci il tuo indirizzo e-mail e accetta il trattamento secondo l'informativa sotto. Riceverai quindi un link per scaricare il modello.