Перейти к содержимому

Технологическая карта для отрасли Малярные работы — создать в RAMSagent

Подготовка работ для малярных работ описывает предварительную обработку, грунтовку и финишную покраску внутри и снаружи. Она охватывает воздействие растворителей, требования к вентиляции, защиту от падений при работе на высоте и эргономику при покраске на крыше.

RAMSagent связывает паспорта безопасности (ПС) с подготовкой работ и предупреждает о продуктах с высокими гигиеническими предельными значениями.

Типичные риски: Технологическая карта — Малярные работы

Риски, описание и применимая нормативная ссылка
Риск Описание Норматив Серьёзность
Solvent Exposure Alkyd paints, varnishes, and cleaning agents contain hydrocarbons with hygienic threshold values. Hot work or spraying always requires fresh air masks. AFS 2018:1 Высокая
Fire and Explosion Risk Solvent vapors form explosive mixtures at concentrations above the lower explosive limit (LEL). No spark generation; electrical equipment must be ATEX-rated in the risk area. AFS 2023:6 Высокая
Falls Indoors from Scaffolding Step ladders and A-frames are the most common causes of falls in painting. Scaffolding or telescopic scaffolding should be used for work above 2 m. AFS 2023:11, 15 kap Высокая
Load Ergonomics Rolling and painting above shoulder height puts strain on the shoulders and neck. Extension poles and adjustable scaffolding reduce the risk. AFS 2012:2 Средняя
AFS 2018:1 Hygienic Threshold Values
Lists threshold values for airborne contaminants — central to the choice of ventilation and respiratory protection.
AFS 2023:10 Chemical Workplace Risks
Requires risk assessment of chemical products, SDS, and hierarchy of controls.
AFS 2023:11 Work at Height
Regulates both internal and external scaffolding as well as personnel lifts.

Часто задаваемые вопросы

Is standard ventilation sufficient indoors?
Often not sufficient for spray painting or large areas — HSE guidance requires mechanical ventilation that keeps air concentration below hygienic threshold values. RAMSagent calculates the flow based on room and product.
When is a flammable substances permit required?
When handling more than 500 liters of flammable liquid class 1–2b at the workplace, or when storing solvents in larger quantities. Contact the Fire and Rescue Service.

Бесплатный шаблон Word: рабочая инструкция

Укажите адрес электронной почты и подтвердите обработку в соответствии с политикой ниже. Затем вы получите ссылку для скачивания шаблона.