Перейти к содержимому

Оценка рисков для отрасли Электромонтаж — создать в RAMSagent

Оценка рисков по электричеству документирует и оценивает риски при выполнении электромонтажных работ в соответствии с нормами по электробезопасности (Трудовой кодекс РФ) и стандартами SS-EN 50110-1. Это определяет выбор метода работы — без напряжения, вблизи напряжения или под напряжением — и требования к квалификации исполнителей.

RAMSagent связывает оценку рисков с уровнями допуска, чтобы правильный человек выполнял правильную работу — от обслуживания освещения в многоквартирном доме до ввода в эксплуатацию солнечной электростанции.

Типичные риски: Оценка рисков — Электромонтаж

Риски, описание и применимая нормативная ссылка
Риск Описание Норматив Серьёзность
Electric Shock and Arc Flash Life-threatening risk when working on or near live parts — the main rule is to work de-energized according to HSE guidance; deviations require a special work permit from a qualified electrician. ELSÄK-FS (Elsäkerhet vid arbete) Критическая
Falls from Height during Roof Installations Installation of solar panels, lighting, and antennas on roofs — requires a fall protection plan in accordance with CDM 2015, prioritizing collective protection. AFS 2023:11, 15 kap Высокая
Fire from Incorrect Connections Cable fires in temporary installations on construction sites or in older buildings — requires correct cable sizing, overload protection, and residual current devices. AFS 2023:10 Средняя
Work in Confined Spaces with Electrical Equipment Cable ducts, switchgear, and equipment rooms — combined risk of electric shock, oxygen deficiency, and rescue difficulties. AFS 2023:10, 5 kap Высокая
ELSÄK-FS HSE Guidance on Electrical Safety
Main rule: work must be de-energized. Special work permits are required for deviations and are issued by a qualified electrician.
AFS 2023:11 Work Equipment and Personal Protective Equipment
Requirements for fall protection (Chapter 15) as well as PPE and insulating tools during electrical work.
AFS 2023:1 Fundamental Duties
Systematic health and safety work — requirements for the electrical contractor as the employer.

Часто задаваемые вопросы

Is ELSÄK-FS sufficient, or do I also need AFS 2023?
Both apply simultaneously. ELSÄK-FS regulates the electrical work itself, while AFS 2023 governs the overall work environment. RAMSagent automatically incorporates both.
How is a special work permit documented?
The risk assessment refers to the work permit as a separate document. The permit is issued by a qualified electrician and must be digitally signed by the worker before starting the work.

Бесплатный шаблон Word: оценка рисков

Укажите адрес электронной почты и подтвердите обработку в соответствии с политикой ниже. Затем вы получите ссылку для скачивания шаблона.