Procedimiento seguro para Fachada — crea con RAMSagent
Una planificación de trabajo para fachadas describe cómo se realiza de manera segura el montaje, enlucido, pintado o renovación de fachadas desde andamios o plataformas elevadoras. Incluye la elección de la clase de andamio, el plan de protección contra caídas, los límites de viento y las medidas ante la influencia del tráfico público.
RAMSagent conecta el plan de andamios, el plan de protección contra caídas y las reglas de acción ante el clima en una misma planificación de trabajo.
Riesgos habituales para Procedimiento seguro — Fachada
| Riesgo | Descripción | Referencia legal | Gravedad |
|---|---|---|---|
| Fall from Scaffolding | Façade scaffolding over 2 m requires a top rail, mid rail, and toe board at all working levels. Access is only permitted via a stair tower; climbing on scaffolding components is prohibited. | AFS 2023:11, 15 kap; AFS 2013:4 | Crítico |
| Wind Impact | At wind speeds exceeding 10 m/s, metal assembly and façade panels must be halted. Scaffolding must be designed for load + wind load according to the manufacturer's instructions. | AFS 2013:4 | Alto |
| Falling Materials to Pedestrians | When working on façades above public traffic, protective canopies or solid barriers are required according to the Building Act. A signal person must be present if the public is nearby. | AFS 2023:13, 10 kap | Alto |
| Ergonomic Strains | Repetitive work above shoulder height can cause strain injuries. The height of the platform should be adjusted so that work is performed between waist and shoulder level. | AFS 2012:2 | Medio |
Normativa aplicable
- AFS 2013:4 Scaffolding
- Regulations for scaffolding class, contractor training, inspection, and documentation.
- AFS 2023:11 Work at Height
- Chapter 15 requires collective protection for fall heights over 2 m on construction sites.
- AFS 2023:13 Construction and Civil Engineering Work
- Requirements for protective canopies and barriers when working over the public.
Preguntas frecuentes
- Who is allowed to assemble scaffolding?
- According to HSE guidance, training in 'General Scaffolding' is required for scaffolding up to 9 m and 'Special Scaffolding' for over 9 m or with deviations in execution.
- What scaffolding class is sufficient for plastering work?
- Plastering work with materials typically requires class 4 (250 kg/m²). Always check the scaffolding drawing and the manufacturer's instructions — RAMSagent highlights the choice in the method statement.
Guías relacionadas
Plantilla Word gratuita: procedimiento de trabajo
Introduce tu correo electrónico y acepta el tratamiento según la política inferior. Recibirás un enlace para descargar la plantilla.